Aluline Triwash Automatic Hand Washer Dryer
 |
Easy to use |
 |
Simple Installation and Maintenance |
 |
Water Saving |
 |
Vandal Resistant |
 |
Aesthetic Finish |
 |
Soap, Hand Wash and Hand Dry |
Installation
The Triwash unit is designed for front service access. The unit is suitable for installation into
brick, timber or metal prefabricated wall types. To aid installation and ensure alignment
within the wall, a sub frame is provided. Fixing points are arranged on each side of the frame.
The unit cabinet is secured to the sub frame with bolts (supplied).
Electrical
Single Phase ac 50Hz -
Power ratings: 220v : 2650w, 230v : 2850w, 240v : 3100w
Waste
The unit should be fitted with a deep seal waste trap that will accept a pipe size of 1 .
Water Connection
A cold water supply of minimum pressure 1.75 bar is required. The supply pipe of 15mm
is connected to the flow regulator stop tap at position D which has a 15mm compression
connection. Contact Aluline for connection to gravity fed or low pressure supplies.
Soap
A liquid soap must be used - soap reservoir capacity: 2.5 ltr. A range of liquid soaps is
available from Aluline.
Dimensions
Weight: 42kg
Cabinet size: 864 x 483 x 300mm
Fascia size: 920 x 545mm
Full installation details are supplied with each
unit and can be obtained from Aluline.
|